Intellidriver Inc. - Software Products

Multicom

Multicom is appointed for emulation of one, two or more (up to 200) serial streams. Hardware devices are not necessary. This product is based on Windows XP DDK and doesn't require using devices of other manufacturers. The whole product is created with the help of Microsoft tooling. Multicom realizes full emulation of Serial Port functions, connected with each other with the help of NULL-MODEM or full cable, including DTR, CTS, DSR, RTS. Multicomr can be interesting for software (for Windows Platforms) developers, who use external devices connected with computer by serial port. Also, it will be interesting for developers of the products appointed for connection of two or more computers through serial ports. Multicom is a commercial categorized under software developer tools tools.

Keywords: dsr multicom dtr port functions emulation microsoft serial port hardware devices windows platforms cts windows xp rts computer xp ddk serial ports null modem orientations a5

Multiport.USB

There is a number of the equipment controlled through a serial port from a PC or a terminal. Also there is a lot of the technologies in the market allowing to operate remotely the consecutive devices through the network TCP/IP. These solutions contain, both software and the hardware. Our company as well has the like solution: it is a product for the remote control of consecutive devices Multiport.USB. Nowadays there are more and more devices with interface USB as alternative to the parallel or consecutive connection, but there are still no decisions on the remote control of USB devices. One can think that there is no need in such solutions or they are not applicable in real life. In order to refuel this opinion we present here some examples of application of this technology. LetOs suppose you have purchased the software protected by USB HASP KEY, but you want this product to be used on several computers, but in different time. If the computers are located close - it is not a problem to pull out the USB HASP KEY from one computer and to insert into another. There is a problem when the computers are located in different premises, or it is worse than that, in different cities (two sub-units of the same firm). Then it is necessary for you to purchase the additional license for the product and it may cost you thousand $. In this case our product can solve your problem, thus you do not break requirements of the license agreement since simultaneously the product can work only on one computer. Now with Multiport.USB you can: -Create virtual USB devices at your PC -Redirect all USB stream to remote computer. This is a commercial listed under software developer tools category.

Keywords: remote computer tcp ip interface usb hasp key serial port simultaneously different time decisions premises usb devices remote control east tec cache management

Multicom OEM

Multicom OEM is a programming interface, which allows you to add support of virtual serial ports to your own application. You have full control over ports created with the help of Multicom OEM, including reading data that some other application has written using WriteFile function, writing data to be read with ReadFile function, flow control signals monitoring and controlling. If you have the software, which works with some device connected to COM port and you want to capture all the data that goes to and from the port, then Multicom OEM is what you need! Just create one virtual port and tell the application to use it. Now you can monitor all data that application writes to the port and redirect it to the real COM port. And vice versa, you monitor all data coming from device and redirect it to the virtual port. With Multicom OEM you can: -Create your_protocol-to-serial abstraction. -Create virtual platform and emulator plugins. -Create usb2serial bluetooth2serial IrDa2serial adapters. This development tools software is listed under software developer tools.

Keywords: multicom reading data oem serial ports emulator vice versa abstraction protocol com port virtual platform programming interface control signals microsoft office 2000 program log

Multicom.Net

While the operation of different facilities, which are connected to a computer via serial port, there may appear the necessity to start up utility program (for these facilities) not in the machine, to which the facilities connect directly, but in the remote machine, that is connected to the facility server via the network Multicom.Net. The developers of the given facilities very often face with such a necessity. For instance, during the debugging in a remote machine or when different people with the help of different machines (which are nevertheless connected to one machine) maintain the same facilities. Multicom.Net is designed especially for the solving of these problems. The use of our product gives you the possibility to give the remote access to serial port via TCP/IP. The product consists of three parts: 1.Multicom.Net is a program emulator of serial ports (up to 255) for operational system W2K/XP. 2.Multicom.Net client is the service, which realizes the exchange between Multicom.Net and TCP/IP. 3. Multicom.Net server is a service which realizes the exchange between a real driver of the serial port and TCP/IP. Multicom. client and server handle two flows: outcoming and incoming. The client takes the bytes that were transferred to all the virtual ports earlier and then transfers them to the server, which was started up on the other computer. Also the client receives flows from the server and gives the bytes to Multicom.Net. With Multicom.net -Optimize network data flow between computer & data terminal. -Split serial output between different clients. -Provide additional control through serial stream. This is a commercial listed under software developer tools category.

Keywords: multicom computer data serial ports serial output tcp ip data flow remote access serial port debugging utility program network data emulator data terminal optimize serial stream encrypted messages program folder