|
|
|
|
DMENU for AutoCAD LT
A complete and full menu replacement for AutoCAD
LT2000, LT2000i, LT2002 and LT2004, geared towards
the 2D ARCHITECTURAL and Interiors disciplines. DMENU for AutoCAD LT is licensed as demo and placed in cad and cam section.
help file rectangles lt2000
|
|
|
AcceliCAD 2008 V2
AcceliCAD is the new standard for low-cost CAD software that offers DWG compatibility and an AutoCAD-like command set and interface. Anyone who has used AutoCAD can easily learn to use AcceliCAD in no time at all. At half the cost of AutoCAD LT and 1/10 the cost of AutoCAD it offers exceptional value while still retaining most of the features and commands of the more expensive software. AcceliCAD® is the intelligent choice.
drag and drop customization intelligent choice
|
|
|
DSYMS for AutoCAD LT
A single Pulldown Menu symbols library Add-on for
AutoCAD LT2000, LT2000i, LT2002 and LT2004,
geared towards the 2D ARCHITECTURAL and Interiors
disciplines. This graphics demo DSYMS for AutoCAD LT is categorized under cad and cam.
disciplines pulldown menu toolbars
|
|
|
MITCalc - Timing Belts Calculation
The calculation is designed for a geometrical design and strength check of toothed belt transmissions. Application contain a database of belts includes the 20 most frequently used types of toothed belts, is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and 3D CAD systems. This graphics shareware MITCalc - Timing Belts Calculation is categorized under graphic apps cad.
geometrical parameters optimum transmission bs standards
|
|
|
MITCalc -Rolling Bearings Calculation II
Selection, calculation and check of rolling bearings (inch versions). Application supports Imperial and Metric units, is based on SKF, ISO, ANSI, SAE standards and support many 2D and 3D CAD systems. MITCalc -Rolling Bearings Calculation II is licensed as shareware and placed in graphic apps cad section.
variable loads iso 76 new hampshire ball bearing
|
|
|
MITCalc3D for Autodesk Inventor
This multi-language calculation package includes solutions for gearing, belt, chain, springs, beam, shaft, and many others. MITCalc support 2D and 3D CAD systems, Imperial and Metric units and many international standards (ANSI, ISO, DIN?.).
metric units 3d cad systems common tasks
|
|
|
PDSYMS DXF Symbols Library
PDSYMS v2.0 is an Architectural/Interiors DXF-FORMAT
Symbols Library Add-on for all CADD packages running
on all platforms and Operating Systems. This demo is archived under cad and cam category.
autosketch intellicad 2000 platforms
|
|
|
MITCalc - Roller Chains Calculation
Geometrical design and strength check of common chain transmissions using roller chains. The application works with many 2D and 3D CAD systems and includes corresponding databases of roller chains. The calculations use data, procedures and algorithms from ANSI/ASME, ACA (American Chain Association) ISO, DIN, BS and JIS. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units.
geometrical design procedures and algorithms aca
|
|
|
MITCalc - V-Belts Calculation
Geometric design and strength check of belt transmissions using V-belts. Application contain a database of belts, supports Imperial and Metric units, is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and 3D CAD systems.
strength parameters gates rubber company autodesk inventor
|
|
|
MITCalc - Shafts Calculation
The calculation is designed for geometrical design and complex strength check of shafts. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on AGMA, ISO and DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks)
shaft stress concentration turbocad
|
|
|
MITCalc - Bolted connection
Geometrical design and strength check of a prestressed bolt connection, loaded by static or cyclic loading resp., acting both in the axis of the bolt and in the plane of the connected parts. Calculation support many 2D CAD systems
|
|
|
MITCalc - Multi pulley calculation
The calculation is developed for geometrical designs of belt and chain transmissions with more sprocket wheels. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and support many 2D CAD systems.
|
|
|
PDSYMS DWG Symbols Library
PDSYMS v2.0 is an Architectural/Interiors DWG-FORMAT
Symbols Library Add-on for all CADD packages running
on all platforms and Operating Systems. This graphics demo PDSYMS DWG Symbols Library is categorized under cad and cam.
|
|
|
MITCalc - Worm Gear Calculation
Design and strength check of worm gear. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks, SolidEdge, Pro/E).
|
|
|
MITCalc - Bevel Gear Calculation
Geometric design and strength check of spur gear with straight, helical and curved toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks).
|
|
|
MITCalc - Internal Spur Gear Calculation
Geometric design and strength check of internal spur gear with straight and helical toothing. Application supports Imperial and Metric units, is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems. Graphics shareware MITCalc - Internal Spur Gear Calculation is listed in graphic apps cad tools.
|
|
|
MITCalc - Rolling Bearings Calculation
Selection, calculation and check of rolling bearings of the company SKF. Application supports Imperial and Metric units, is based on SKF, ISO, ANSI, SAE standards and support many 2D and 3D CAD systems
|
|
|
MITCalc - Torsion Springs
Geometric and strength designs of spiral cylindrical torsion springs loaded with static or cyclic loading. Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems.
|
|
|
MITCalc - Spur Gear Calculation
Geometric design and strength check of spur gear with straight and helical toothing. Application supports Imperial and Metric units, is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems
|
|
|
MITCalc
This office and business application is the multi-language mechanical and technical calculation package. It includes solutions for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection and many others. The calculations are compatible with many types of 2D (AutoCAD, IntelliCAD..) and 3D (Inventor, SolidWorks) CAD systems and support both Imperial and Metric units and are processed according to ANSI, ISO, DIN, BS, Japanese and other standards. This business shareware MITCalc is categorized under cad, engineering calculations,.
|
|
|
progeCAD 2007 Standard
ProgeCAD IntelliCAD natively reads and writes AutoCAD DWG files, no need for conversion! Industry standard AutoCAD Commands. AutoCAD Menu, Script, Font Compatibility, AutoLISP Compatibility! progeCAD 2007 Standard is an easy replacement for AutoCAD and AutoCAD LT! progeCAD 2007 Standard is licensed as shareware and placed in graphic apps cad section.
|
|
|
DEANLT for AutoCAD LT
A complete and full menu replacement for AutoCAD, LT2000, LT2000i, LT2002 and LT2004. The package includes the Main Menu file which contains expanded Pull Down Menu routines; all symbols required by the new routines; a whole collection of new toolbars and fonts and much more.
|
|
|
MITCalc - Shaft connection
Geometric designs and strength checks of shaped connections of shafts with hubs (keys, splines). Application supports Imperial and Metric units, is based on ANSI, ISO, DIN BS, JIS standards and support many 2D CAD systems
|
|
|
Export Manager
The Export Manager is an AutoCAD add-on for the conversion of drawings into more than 75 raster and vector formats (ai, bmp, cgm, emf, eps, gif, jpg, pcd, pcl, pdf, pic, png, rib, rpl, sgi, sk, swf, svg, tga, tif, wmf ...). Export Manager is a shareware software filed under cad, conversion, export, utilities, clipboard utilities.
|
|
|
progeCAD 2007 Professional
ProgeCAD IntelliCAD natively reads and writes AutoCAD DWG files, no need for conversion! Industry standard AutoCAD Commands. AutoCAD Menu, Script, Font Compatibility, AutoLISP Compatibility! Advanced Rendering Options, 3D ACIS Solid Modeling. Raster. This shareware is archived under graphic apps cad category.
|
|
|
MITCalc - Compression Springs
Geometric and strength designs of helical compression cylindrical springs loaded with static or fatigue loading. Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems.
|
|
|
MITCalc - Tension Springs
Geometric and strength designs of helical tension cylindrical springs loaded with static loading. Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems.
|
|
|
MITCalc - Pinned couplings
Geometric design and strength check of couplings using pins and clevis pins. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO, DIN, JIS, BS and CSN standards and support many 2D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD)
|
Copyright © 2003-2011 Filesland Software
|
|
