PAS-Products - Software Products

:: New features to this program include * Musical Note detector * dBFS and RMS Peak Level Meter * Weighting filters dB(A), dB(B) and dB(C) * 48000 hz audio stream * wide screen compatible * Correlation percentaged labels * 1/3, 1/6, 1/12, 1/24 Octave displaying of the Spectrum * Zoom function, where you can select 4 frequency ranges * resolution from 32768 fft so you have 1,46 Hz steps per each bar in the zoom function * Average function * Create a jpg from the actual displayed spectum :: The Basic Module * Wave recording for the line in and the mic input * Mp3 player to analyze Mp3 files (Mp2, atx) * Two Peak Level Labels that give you control of the highest amplitude * Peak hold option * Generator leveling calibrated to 1/100 of a dB. * Mp3/Wave Tools like: * A Normalize function for wave files, Codec to convert Mp3 back to wave files, * Split Stereo Wave file into 2 Mono files, Swap left with the right channels * Spectrum +3dB for an overall improved monitoring of signals (less bass and more highs!) :: Standard Features * A Visual Pause feature in the display for instantaneous evaluation of data * Direct comparisons with Function keys * Recording of the Critical Data with display of Amp, db, and frequency * Results can be saved in text files for further evaluation * 12 programmable frequencies for evaluation * Built-in generator monitors balance between input and output * Calibration of Input and Output to soundcard for correct line-in level recording * 3D Wavelet Transform Display in a scrolling-active feature * A precise Sync to loop feature with documented frequency analysis :: The Print Module Print function for a frozen Spectrum with free eligibility labels, colors, and info text arrangements. You can create your own labels and save information about the measurements you record. Spectrum Ananlyzer pro lab is a shareware categorized under music tools.

Keywords: rms peak level meter 1-3 1-6 1-12 1-24 octave zoom function recommended meet strict professional demands sound analysis schs

24 Channel Multi Level Meter Bridge

PAS Multi Meter Bridge can be configured in a number of different ways, to accurately model the ballistics, responses and graphics of a wide range of standard peak programme meters. These meters currently include the following: IEC 268-10 Type I (Nordic N9 meter) IEC268-10 Type IIb (EBU PPM meter) IEC 268-10 Type IIa (BBC PPM meter) DIN 45406 You can monitor 8 input channels, 16 input channels or 24 input channels in realtime. Choose between 5ms, 10ms, 15ms, 20ms and 300ms integration time. Referenz level -18 dBFS or 0 dBFS. 24 Channel Multi Level Meter Bridge is a shareware categorized under audio, multimedia other tools.

Keywords: meter type channels iec ppm integration time level nordic bbc ebu bridge iia iib din reference holiday scenes

Spectrum Analyzer pro Live

Correlation Meter (giving you information about the the mono compatibility of a stereo and a Surround signal) you also can make easily Phase Check with this tool... Displaying in 1/3, 1/6, 1/12, 1/24 Octave frequency displayinge and FFT (2048 Bands) Decay settings (Display speed) for the Spectrum in the Octave Mode, the FFT Mode and one for the VU-Meters Big Window (to have a full screen of the spectrum) see screen shot... Multi Mode Support. Switch between 4 Stereo Devices easily with the Keys. So you can analyze the input for Alesis ADAT, 8 Track Recording and any Multi Channel recordings... EQ suggestion -for realtime and wave-mpeg modus Convert Wave files to Mp3 files settings from 32 up to 320 bit/sec Tap Delay calculator- display for full, half and quarter Beats improvement to calibrate the generator output Sound Check without a Band Phase Check. Spectrum Analyzer pro Live is a audio software.

Keywords: 1/3 1/6 1/12 1/24 octave spectrum analyzer rms vu meter correlation rms level meter encrypted emails

Graphic Equalizer Studio 2005

* Neu in this version * Correlations Meter * RMS Level Meter and Peak Level for the Input and Output * integrated Compressor, Limiter und Enhancer * 1/3 Octave displaying for the frequency bands * * Automatic Calculation of Band Frequencies with Octave selector * DSP Normalization of Wave files * Programmable Frequency selection with independent Band Calculator * Programmable Q-Factor for fine-tuning separate configurations * Configurations saved in 2 convenient locations for reloading all project data * Automated Equalization of Live Audio in Real time for evaluation via external support * Automated Real time Equalization of all Digital Audio infinitely with no loss of quality * MP3 Player / Refresher * Q-Factor for fine-tuning separate configurations * Sync to loop feature for specific evaluation of Digital Audio files * Programmable Frequency selection with independent Band Calculator Programmable When Auto Correct is enabled, it will scan all selected frequencies in the wav file to determine the minimum and maximum amplitudes.It will then correct these variations by automatically increasing or decreasing the levels of attenuation at specific frequency intervals (usually 1/3 octave). The result is a nearly linear frequency response. For the listener, this creates more consistent sounding audio. A typical application that would benefit from this tool is an internet radio station. A common problem that many of these stations experience is an inconsistency in true audio reproduction (i.e., different songs sound different). By utilizing this function, one may be assured that there will be an average and consistent degree of bass and treble response, independent of a specific song title or artist. Varying the "Q-Factor" will change the overall tone quality. Using a Q-Factor over 7-8 will create a softer, finer, more blended sound. Graphic Equalizer Studio 2005 is a shareware categorized under music creation tools.

Keywords: graphic equalizer 1-3 octave correlations meter rms level meter and peak level integrated compressor limiter und enhancer integrated compressor limiter und enhancer rms level meter demo version

Graphic Equalizer Studio

* New in this version * Mixer Play List (use it like Windows Media Player) *Batch Restoration Tool for your MP3 files ** RMS Level Meter and Peak Level for the Input and Output * integrated Compressor, Limiter und Enhancer * 1/3 Octave displaying for the frequency bands * Automatic Calculation of Band Frequencies with Octave selector * DSP Normalization of Wave files * Programmable Frequency selection with independent Band Calculator * Programmable Q-Factor for fine-tuning separate configurations* Configurations saved in 2 convenient locations for reloading all project data * Automated Equalization of Live Audio in Real time for evaluation via external support * Automated Real time Equalization of all Digital Audio infinitely with no loss of quality * MP3 Player / Refresher * Q-Factor for fine-tuning separate configurations* Sync to loop feature for specific evaluation of Digital Audio files* Programmable Frequency selection with independent Band Calculator Programmable *Whhen Auto Correct is enabled, it will scan all selected frequencies in the wav file to determine the minimum and maximum amplitudes.It will then correct these variations by automatically increasing or decreasing the levels of attenuation at specific frequency intervals (usually 1/3 octave). The result is a nearly linear frequency response. For the listener, this creates more consistent sounding audio. A typical application that would benefit from this tool is an internet radio station. A common problem that many of these stations experience is an inconsistency in true audio reproduction (i.e., different songs sound different). Graphic Equalizer Studio is a shareware categorized under audio, multimedia rippers, converters tools.

Keywords: graphic equalizer octave correlations meter rms level meter and peak level integrated compressor limiter und enhancer data disk

dolby surround meter

At this software it concerns a combined level and correlation meter for Surround signals for the 5.1-Standard. The levels of all six channels as well as the phase correlation between all combinations of two channels are represented, so that defined statements are possible for the mono compatibility of a stereo and a Surround signal, in addition, for the Stereo compatibility of a Dolby Prologic signal or a 5.1-Signals in the Downmix. PAS-Surround Meter can be configured in a number of different ways, to accurately model the ballistics, responses and graphics of a wide range of standard peak programme meters. These meters currently include the following: IEC 268-10 Type I - Nordic N9 IEC 268-10 Type IIa - BBC PPM IEC268-10 Type IIb - EBU PPM DIN 45406 Provides information about mutual phase-frequency relations between the signal of the left and right channel and allows us to spot any possible irregularities. These 'irregularities' may not have any significance in the case of stereo playback, but it should be remembered that the material we record can also be played as a mono signal (for example, on TV or on one of the radio stations which are broadcast or received in mono), and is worth sounding at least similar to what we imagined. However, you have to learn to read the indications of the correlation meter. dolby surround meter is a audio software.

Keywords: iec 268-10 type i - nordic n9 iec 268-10 type iia - bbc ppm iec268-10 type iib - ebu ppm din 45406 surround dolby 5-1 pas-surround meter display ballistic nordic n9 bbc ppm ebu din 45406 jam packed

Search Software: