|
|
|
|
AcceliCAD 2008 V2
AcceliCAD is the new standard for low-cost CAD software that offers DWG compatibility and an AutoCAD-like command set and interface. Anyone who has used AutoCAD can easily learn to use AcceliCAD in no time at all. At half the cost of AutoCAD LT and 1/10 the cost of AutoCAD it offers exceptional value while still retaining most of the features and commands of the more expensive software. AcceliCAD® is the intelligent choice.
dwg file format drag and drop intelligent choice
|
|
|
DSYMS for AutoCAD LT
A single Pulldown Menu symbols library Add-on for
AutoCAD LT2000, LT2000i, LT2002 and LT2004,
geared towards the 2D ARCHITECTURAL and Interiors
disciplines. DSYMS for AutoCAD LT is licensed as demo and placed in cad and cam section.
system variables redefined fonts
|
|
|
DMENU for AutoCAD LT
A complete and full menu replacement for AutoCAD LT
2000, LT2000i, LT2002 and LT2004, geared towards the
2D ARCHITECTURAL and Interiors disciplines. This graphics demo DMENU for AutoCAD LT is categorized under cad and cam.
toolbars triangles architectural symbols
|
|
|
MITCalc - Spur Gear Calculation
Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks).
geometric design temperature rise metric units
|
|
|
MITCalc - Shafts Calculation
The calculation is designed for geometrical design and complex strength check of shafts. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on AGMA, ISO and DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks)
critical speed 3d cad systems coefficients
|
|
|
MITCalc - Multi pulley calculation
The calculation is developed for geometrical designs of belt and chain transmissions with more sprocket wheels. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and support many 2D CAD systems.
cad systems distances intellicad
|
|
|
MITCalc - Internal Spur Gear Calculation
Geometric design and strength check of internal spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks, SolidEdge, Pro/E).
temperature rise agma geometric parameters
|
|
|
MITCalc - Timing Belts Calculation
The calculation is designed for a geometrical design and strength check of toothed belt transmissions. Application contain a database of belts includes the 20 most frequently used types of toothed belts, is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and 3D CAD systems. Graphics shareware MITCalc - Timing Belts Calculation is listed in graphic apps cad tools.
3d cad systems synchronous belts toothed belts
|
|
|
MITCalc - Pinned couplings
Geometric design and strength check of couplings using pins and clevis pins. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO, DIN, JIS, BS and CSN standards and support many 2D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD)
cad systems metric units clevis pins
|
|
|
MITCalc3D for Autodesk Inventor
MITCalc is the multi-language mechanical and technical calculation package. It includes solutions for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection and many others. The calculations are compatible with many types of 2D (AutoCAD, IntelliCAD..) and 3D (Autodesk Inventor) CAD systems and support both Imperial and Metric units and are processed according to ANSI, ISO, DIN, BS, Japanese and other standards.
microsoft excel tolerance analysis turbocad
|
|
|
MITCalc - Shaft connection
Geometric designs and strength checks of shaped connections of shafts with hubs (parallel side keys, Woodruff's keys, straight-sided splines, involute splines). Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ISO, SAE, DIN, BS and JIS standards and support many 2D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD).
|
|
|
MITCalc - Bevel Gear Calculation
Geometric design and strength check of bevel gear with straight and helical toothing. Application supports Imperial and Metric units, is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems
|
|
|
progeCAD 2007 Standard
ProgeCAD IntelliCAD natively reads and writes AutoCAD DWG files, no need for conversion! Industry standard AutoCAD Commands. AutoCAD Menu, Script, Font Compatibility, AutoLISP Compatibility! progeCAD 2007 Standard is an easy replacement for AutoCAD and AutoCAD LT! progeCAD 2007 Standard is a shareware software filed under graphic apps cad utilities.
|
|
|
MITCalc - Tension Springs
A set of engineering, industrial, and technical calculations. It is intended for the purposes of geometric and strength designs of helical tension cylindrical springs made of wires and rods of circular sections, cold formed, loaded with static loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.
|
|
|
DEANLT for AutoCAD LT
A complete and full menu replacement for AutoCAD, LT2000, LT2000i, LT2002 and LT2004. The package includes the Main Menu file which contains expanded Pull Down Menu routines; all symbols required by the new routines; a whole collection of new toolbars and fonts and much more.
|
|
|
MITCalc - Worm Gear Calculation
Design and strength check of worm gear. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks, SolidEdge, Pro/E). Graphics shareware MITCalc - Worm Gear Calculation is listed in graphic apps cad tools.
|
|
|
MITCalc - Roller Chains Calculation
Geometrical design and strength check of common chain transmissions using roller chains. The application works with many 2D and 3D CAD systems and includes corresponding databases of roller chains. The calculations use data, procedures and algorithms from ANSI/ASME, ACA (American Chain Association) ISO, DIN, BS and JIS. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units.
|
|
|
MITCalc - Torsion Springs
A set of engineering and technical calculations for your day-to-day routines. The calculation is intended for geometric and strength designs of spiral cylindrical torsion springs made of wires and rods in circular sections, cold formed, loaded with a static or cyclic loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.
|
|
|
MITCalc - Rolling Bearings Calculation
Selection, calculation and check of rolling bearings parameters of the company SKF. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on SKF, ISO, ANSI, SAE standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks).
|
|
|
Export Manager
The Export Manager is an AutoCAD add-on for the conversion of drawings into more than 75 raster and vector formats (ai, bmp, cgm, emf, eps, gif, jpg, pcd, pcl, pdf, pic, png, rib, rpl, sgi, sk, swf, svg, tga, tif, wmf ...). With several options the graphic can be modified comfortably (size, lineweight, colors...). A preview displays the graphic. Afterwards the drawing can be exported to the Clipboard or to one of the 75 provided formats.
|
|
|
MITCalc - V-Belts Calculation
Geometric design and strength check of belt transmissions using V-belts. Application contain a database of belts, supports Imperial and Metric units, is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and 3D CAD systems.
|
|
|
PDSYMS DXF Symbols Library
PDSYMS v2.0 is an Architectural/Interiors DXF-FORMAT
Symbols Library Add-on for all CADD packages running
on all platforms and Operating Systems. PDSYMS DXF Symbols Library is licensed as demo and placed in cad and cam section.
|
|
|
PDSYMS DWG Symbols Library
PDSYMS v2.0 is an Architectural/Interiors DWG-FORMAT
Symbols Library Add-on for all CADD packages running
on all platforms and Operating Systems. PDSYMS DWG Symbols Library is a demo software filed under cad and cam utilities.
|
|
|
MITCalc
This office software is the multi-language mechanical and technical calculation package. It includes solutions for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection and many others. The calculations are compatible with many types of 2D (AutoCAD, IntelliCAD..) and 3D (Inventor, SolidWorks) CAD systems and support both Imperial and Metric units and are processed according to ANSI, ISO, DIN, BS, Japanese and other standards. This business shareware MITCalc is categorized under cad, engineering calculations,.
|
|
|
MITCalc - Compression Springs
The calculation is intended for the purposes of geometric and strength designs of helical compression cylindrical springs made of wires and rods of circular sections, cold formed, loaded with static or fatigue loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.
|
|
|
MITCalc - Bolted connection
Geometrical design and strength check of a prestressed bolt connection, loaded by static or cyclic loading resp., acting both in the axis of the bolt and in the plane of the connected parts. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. The application includes a table of commonly used materials according to ISO, SAE, DIN, BS, AF ASTM and AISI. Calculation support many 2D CAD systems.
|
|
|
MITCalc -Rolling Bearings Calculation II
Selection, calculation and check of rolling bearings (inch versions). Application supports Imperial and Metric units, is based on SKF, ISO, ANSI, SAE standards and support many 2D and 3D CAD systems. This shareware is archived under graphic apps cad category.
|
|
|
progeCAD 2007 Professional
ProgeCAD IntelliCAD natively reads and writes AutoCAD DWG files, no need for conversion! Industry standard AutoCAD Commands. AutoCAD Menu, Script, Font Compatibility, AutoLISP Compatibility! Advanced Rendering Options, 3D ACIS Solid Modeling included. Import and edit your Raster Images, including Raster to Vector. Comes with near 10,000 standard symbols and blocks. progeCAD 2007 Professional is an easy replacement for AutoCAD and AutoCAD LT! This graphics shareware progeCAD 2007 Professional is categorized under graphic apps cad.
|
Copyright © 2003-2011 Filesland Software
|
|
