Software Demo

2D CAD Viewer DXF DWG to WMF BMP Converter by Soft Gold Ltd

Professional image viewer for industry and home using. Supported: *.DWG, *.DXF, *.HGL, *.PLT, *.HG, *.HPG, *.PLO, PCX, BMP, JPG, JPEG, WMF, etc. ABViewer exports to BMP, EMF, JPEG, GIF. Clip Rectangle for copying to clipboard, printing and saving to the file. It allows to drag images, zoom in, zoom out, centering, printing. Advanced Print: E, D, C, B (A0-A2) paper formats printed on A(A4)printer for gluing afterwards

dwg dxf dwg dxf hpgl print printing autocad emf bmp b c d e format a0 a1 a2 a3 ms word clipboard convert a4

MITCalc - Tension Springs by MITCalc

The calculation is intended for the purposes of geometric and strength designs of helical tension cylindrical springs made of wires and rods of circular sections, cold formed, loaded with static loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.

spring springs cylindrical spring tension spring helical spring en 13906-2 din 2089-2 din 2097 static strength check

MITCalc - Spur Gear Calculation by MITCalc

Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks).

gearing spur gearing gear tooth toothing design strength check helical iso 6336 iso 1328 din 3990 ansi b6.1-1968 agma 2001-c95 agma 908-b89/95

MITCalc - Worm Gear Calculation by MITCalc

Design and strength check of worm gear. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks, SolidEdge, Pro/E).

gearing worm gearing gear tooth toothing design strength check helical agma 6022-c93 din 3996 din 3975-1

MITCalc - Tolerance analysis by MITCalc

Two programs for the tolerance analysis of linear, 2D and 3D dimensional chains, which in addition to the basic analysis (Worst case, Root Sum Squares, Monte Carlo...) also include a solution to some special matters, like analysis of a dimensional chain deformed as a result of temperature change and design of tolerances for a selective assembly. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units.

tolerance tolerances analysis worst case root sum squares 6 sigma deviation fits ansi b4.1 ansi b4.2 iso 286 iso 1829 iso 2768 en 20286 jis b 0401

MITCalc - Shaft connection by MITCalc

Geometric designs and strength checks of shaped connections of shafts with hubs (parallel side keys, Woodruff's keys, straight-sided splines, involute splines). Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ISO, SAE, DIN, BS and JIS standards and support many 2D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD).

shaft hub connection shaped connection keys splines design strength check ansi b17.1 ansi b17.2 ansi b92.1 ansi b92.2m iso r773 iso 14 iso 4156 din 6885 din 6888 din 5464 din 5471 din 5472 din 5480 bs 4235 bs 6 jis b 1301

MITCalc - Torsion Springs by MITCalc

The calculation is intended for the purposes of geometric and strength designs of spiral cylindrical torsion springs made of wires and rods in circular sections, cold formed, loaded with a static or cyclic loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.

spring springs cylindrical spring torsion spring spiral spring en 13906-2 din 2088 static strength check

MITCalc - Compression Springs by MITCalc

The calculation is intended for the purposes of geometric and strength designs of helical compression cylindrical springs made of wires and rods of circular sections, cold formed, loaded with static or fatigue loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.

spring springs cylindrical spring compression spring helical spring en 13906-1 din 2089-1 din 2095 static strength check

MITCalc - V-Belts Calculation by MITCalc

The calculation is designed for a geometrical design and strength check of belt transmissions using V-belts. Application contain a database of belts includes the 24 most frequently used types of v-belts, is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and 3D CAD systems.

belt v-belt v-belt transmission design strength check narrow v-belts ansi/rma ip-22 traditional v-belts ansi/rma ip-20 light duty v-belts ansi/rma ip-23 din 7753 din 2211 din 2215 iso 4184

24 Channel Multi Level Meter Bridge by PAS-Products

PAS Multi Meter Bridge can be configured in a number of different ways, to accurately model the ballistics, responses and graphics of a wide range of standard peak programme meters. These meters currently include the following:IEC 268-10 Type I (Nordic N9 meter)IEC268-10 Type IIb (EBU PPM meter)IEC 268-10 Type IIa (BBC PPM meter) DIN 45406,You can monitor 8 input channels, 16 input channels or 24 input channels in realtime. integration time

meter type channels iec ppm integration time level nordic bbc ebu bridge iia iib din reference

Page 1 out of 4    1 2 3 4