|
|
|
|
|
|
MITCalc - Spur Gear Calculation
by MITCalc
Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks).
din 3990 ansi b6.1-1968 toothing spur gearing agma 908-b89/95
|
|
|
MITCalc - Worm Gear Calculation
by MITCalc
Design and strength check of worm gear. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks, SolidEdge, Pro/E).
gearing gear tooth design din 3975-1
|
|
|
MITCalc - Compression Springs
by MITCalc
The calculation is intended for the purposes of geometric and strength designs of helical compression cylindrical springs made of wires and rods of circular sections, cold formed, loaded with static or fatigue loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.
compression spring dynamic strength check en 13906-1 springs din 2095 static strength check
|
|
|
MITCalc - Springs - 15 types
by MITCalc
The calculation is intended for the purposes of geometric and strength designs of metal springs of various types and designs (15 types), subjected to static or cyclic loads. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards.
springs torsion bar springs spring leaf springs spiral springs cylindrical spring
|
|
|
MITCalc - Tension Springs
by MITCalc
A set of engineering, industrial, and technical calculations. It is intended for the purposes of geometric and strength designs of helical tension cylindrical springs made of wires and rods of circular sections, cold formed, loaded with static loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.
static strength check dynamic strength check en 13906-2 springs cylindrical spring helical spring
|
|
|
MITCalc - Bevel Gear Calculation
by MITCalc
Geometric design and strength check of spur gear with straight, helical and curved toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks).
agma 2003-a86/88 gearing gear agma 908-b89/95 design iso 6336
|
|
|
MITCalc - Internal Spur Gear Calculation
by MITCalc
Geometric design and strength check of internal spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks, SolidEdge, Pro/E).
internal gear gear spur gearing toothing iso 6336
|
Copyright © 2003-2012 FilesLand Software
|
|