Software Demo

MITCalc - Profiles Calculation by MITCalc

The calculation solves area characteristics of profiles created in a simple graphic editor and mass characteristics of solids created by extrusion or rotation of the profile. Area characteristic are solved for main and turned axis and also all graphs are available as well. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units.

area characteristic profile editor profile characteristic profile design profile rotation mass characteristic

MITCalc - V-Belts Calculation by MITCalc

The calculation is designed for a geometrical design and strength check of belt transmissions using V-belts. Application contain a database of belts includes the 24 most frequently used types of v-belts, is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and 3D CAD systems.

narrow v-belts ansi/rma ip-22 din 2211 v-belt transmission light duty v-belts ansi/rma ip-23 traditional v-belts ansi/rma ip-20 design

MITCalc -Rolling Bearings Calculation II by MITCalc

Selection, calculation and check of rolling bearings (inch version). Application is developed in MS Excel, is multi- language and supports Imperial and Metric units. Is based on ISO, ANSI, SAE standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks).

equivalent static load static safety factor roller bearing equivalent dynamic load basic life permissible radial load

MITCalc - Shaft connection by MITCalc

Geometric designs and strength checks of shaped connections of shafts with hubs (parallel side keys, Woodruff's keys, straight-sided splines, involute splines). Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ISO, SAE, DIN, BS and JIS standards and support many 2D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD).

din 6888 din 6885 din 5471 shaped connection connection iso r773

MITCalc - Torsion Springs by MITCalc

A set of engineering and technical calculations for your day-to-day routines. The calculation is intended for geometric and strength designs of spiral cylindrical torsion springs made of wires and rods in circular sections, cold formed, loaded with a static or cyclic loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.

dynamic strength check en 13906-2 cylindrical spring torsion spring spiral spring static strength check

MITCalc - Tolerance analysis by MITCalc

Two programs for the tolerance analysis of linear, 2D and 3D dimensional chains, which in addition to the basic analysis (Worst case, Root Sum Squares, Monte Carlo...) also include a solution to some special matters, like analysis of a dimensional chain deformed as a result of temperature change and design of tolerances for a selective assembly. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units.

ansi b4.1 root sum squares worst case jis b 0401 iso 2768 iso 1829

MITCalc - Buckling Calculation by MITCalc

Calculation of the optimum cross-section of slender struts strained for buckling and calculation of the appropriate strength check according to Johnson, Tetmajer, Euler and Secant method. Simple definition of the strut type - 40 types of predefined cross sections. Used standards: DIN 1025, 1026, 1028, 1029, 1024, AISC W, S, C, L, LU

din 1025 s 1029 l stress slender strut

MITCalc - Springs - 15 types by MITCalc

The calculation is intended for the purposes of geometric and strength designs of metal springs of various types and designs (15 types), subjected to static or cyclic loads. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards.

conical springs springs torsion bar springs spiral springs compression spring cylindrical spring

MITCalc - Pinned couplings by MITCalc

Geometric design and strength check of couplings using pins and clevis pins. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO, DIN, JIS, BS and CSN standards and support many 2D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD)

clevis pin pin joint pinned couplings coupling pins

MITCalc by MITCalc

MITCalc is the multi-language mechanical and technical calculation package. It includes solutions for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection and many others. The calculations are compatible with many types of 2D (AutoCAD, IntelliCAD..) and 3D (Inventor, SolidWorks) CAD systems and support both Imperial and Metric units and are processed according to ANSI, ISO, DIN, BS, Japanese and other standards.

inventor engineer autocad mechanical calculations chain belt

Page 1 out of 3    1 2 3