Software Demo

MITCalc - Tension Springs by MITCalc

The calculation is intended for the purposes of geometric and strength designs of helical tension cylindrical springs made of wires and rods of circular sections, cold formed, loaded with static loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.

spring springs cylindrical spring tension spring helical spring en 13906-2 din 2089-2 din 2097 static strength check

MITCalc - Roller Chains Calculation by MITCalc

Geometrical design and strength check of common chain transmissions using roller chains. The application works with many 2D and 3D CAD systems and includes corresponding databases of roller chains. The calculations use data, procedures and algorithms from ANSI/ASME, ACA (American Chain Association) ISO, DIN, BS and JIS. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units.

chain roller chain design strength check chain transmission ansi/asme b29.1m ansi/asme b29.3 din 8187 din 8181 din 8181 din 8164 din 8150 iso r606 iso 1275 bs 228 jis b1801 jis b1803.

MITCalc - Bevel Gear Calculation by MITCalc

Geometric design and strength check of spur gear with straight, helical and curved toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks).

gearing bevel gear gear tooth toothing design strength check helical din 3971 din 3991 iso 6336 iso 1328 din 3990 ansi b6.1-1968 agma 2001-c95 agma 908-b89/95 agma 2003-a86/88 agma 2005-b88

MITCalc - Compression Springs by MITCalc

The calculation is intended for the purposes of geometric and strength designs of helical compression cylindrical springs made of wires and rods of circular sections, cold formed, loaded with static or fatigue loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.

spring springs cylindrical spring compression spring helical spring en 13906-1 din 2089-1 din 2095 static strength check

MITCalc - Internal Spur Gear Calculation by MITCalc

Geometric design and strength check of internal spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks, SolidEdge, Pro/E).

gearing internal gear spur gearing gear tooth toothing design strength check helical iso 6336 iso 1328

MITCalc - Springs - 15 types by MITCalc

The calculation is intended for the purposes of geometric and strength designs of metal springs of various types and designs (15 types), subjected to static or cyclic loads. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards.

spring springs cylindrical spring compression spring helical spring conical springs spiral springs torsion bar springs leaf springs

MITCalc - Worm Gear Calculation by MITCalc

Design and strength check of worm gear. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks, SolidEdge, Pro/E).

gearing worm gearing gear tooth toothing design strength check helical agma 6022-c93 din 3996 din 3975-1

MITCalc - Torsion Springs by MITCalc

The calculation is intended for the purposes of geometric and strength designs of spiral cylindrical torsion springs made of wires and rods in circular sections, cold formed, loaded with a static or cyclic loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.

spring springs cylindrical spring torsion spring spiral spring en 13906-2 din 2088 static strength check

MITCalc - Shafts Calculation by MITCalc

The calculation is designed for geometrical design and complex strength check of shafts. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on AGMA, ISO and DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks)

shaft shafts design strength check stress concentration critical speed safety coefficients deflection bending angle din 743

MITCalc - Force shaft connection by MITCalc

Geometric designs and strength checks of force couplings of shafts with hubs (Interference fit, clamping connection). Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and is based on ISO, SAE, DIN, BS and JIS standards.

shaft hub connection force couplings interference fit clamping connection ansi b4.1 iso 286 din 7190

Page 1 out of 2    1 2