Software Demo

MITCalc - Bolted connection by MITCalc

Geometrical design and strength check of a prestressed bolt connection, loaded by static or cyclic loading resp., acting both in the axis of the bolt and in the plane of the connected parts. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. The application includes a table of commonly used materials according to ISO, SAE, DIN, BS, AF ASTM and AISI. Calculation support many 2D CAD systems.

bolt bolt connection bolt calculation prestressed bolt strength check vdi 2230 ansi b1.1 ansi 273 ansi b18.2.1 ansi b18.2.2 ansi b18.3 ansi b18.6.2 ansi b18.6.3 ansi b18.22.1 iso 273 iso 1207 iso 4016 iso 4032 iso 4035 iso 4762

MITCalc - Force shaft connection by MITCalc

Geometric designs and strength checks of force couplings of shafts with hubs (Interference fit, clamping connection). Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and is based on ISO, SAE, DIN, BS and JIS standards.

shaft hub connection force couplings interference fit clamping connection ansi b4.1 iso 286 din 7190

MITCalc - Internal Spur Gear Calculation by MITCalc

Geometric design and strength check of internal spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks, SolidEdge, Pro/E).

gearing internal gear spur gearing gear tooth toothing design strength check helical iso 6336 iso 1328

MITCalc - Technical Formulas by MITCalc

Solutions to dozens of basic formulas from physics, technology and mechanical engineering. Help, pictures as well as many selection tables with values of various coefficients and material properties are available for the formulas. This module also includes a workbook with conversion of units and many technical tables. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units.

solid motion linear motion rectilinear motion rotation rotation motion thermal expansion expansion friction rolling friction journal friction belt friction units units convertor

MITCalc - Torsion Springs by MITCalc

The calculation is intended for the purposes of geometric and strength designs of spiral cylindrical torsion springs made of wires and rods in circular sections, cold formed, loaded with a static or cyclic loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.

spring springs cylindrical spring torsion spring spiral spring en 13906-2 din 2088 static strength check dynamic strength check.

MITCalc - Tension Springs by MITCalc

The calculation is intended for the purposes of geometric and strength designs of helical tension cylindrical springs made of wires and rods of circular sections, cold formed, loaded with static loading. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards and support many 2D and 3D CAD systems.

spring springs cylindrical spring tension spring helical spring en 13906-2 din 2089-2 din 2097 static strength check dynamic strength check.

MITCalc - Buckling Calculation by MITCalc

Calculation of the optimum cross-section of slender struts strained for buckling and calculation of the appropriate strength check according to Johnson, Tetmajer, Euler and Secant method. Simple definition of the strut type - 40 types of predefined cross sections. Used standards: DIN 1025, 1026, 1028, 1029, 1024, AISC W, S, C, L, LU

buckling slender strut beam column moment stress safety din 1025 1026 1028 1029 1024 aisc w s c l lu

MITCalc - Springs - 15 types by MITCalc

The calculation is intended for the purposes of geometric and strength designs of metal springs of various types and designs (15 types), subjected to static or cyclic loads. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards.

spring springs cylindrical spring compression spring helical spring conical springs spiral springs torsion bar springs leaf springs

MITCalc - Timing Belts Calculation by MITCalc

The calculation is designed for a geometrical design and strength check of toothed belt transmissions. Application contain a database of belts includes the 20 most frequently used types of toothed belts, is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and 3D CAD systems.

belt toothed belt timing belt synchronous belt design strength check

MITCalc3D for Autodesk Inventor by MITCalc

MITCalc is the multi-language mechanical and technical calculation package. It includes solutions for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection and many others. The calculations are compatible with many types of 2D (AutoCAD, IntelliCAD..) and 3D (Autodesk Inventor) CAD systems and support both Imperial and Metric units and are processed according to ANSI, ISO, DIN, BS, Japanese and other standards.

calculation calculations mechanical calculations technical calculations engineer cad cam autocad gear belt chain bearing beam shaft spring bolt tolerance analysis design autodesk inventor

Page 1 out of 3    1 2 3