All Free

MITCalc - Bevel Gear Calculation by MITCalc

Geometric design and strength check of spur gear with straight, helical and curved toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks).

gearing bevel gear gear tooth toothing design strength check helical din 3971 din 3991 iso 6336 iso 1328 din 3990 ansi b6.1-1968 agma 2001-c95 agma 908-b89/95 agma 2003-a86/88 agma 2005-b88

24 Channel Multi Level Meter Bridge by PAS-Products

PAS Multi Meter Bridge can be configured in a number of different ways, to accurately model the ballistics, responses and graphics of a wide range of standard peak programme meters. These meters currently include the following:IEC 268-10 Type I (Nordic N9 meter)IEC268-10 Type IIb (EBU PPM meter)IEC 268-10 Type IIa (BBC PPM meter) DIN 45406,You can monitor 8 input channels, 16 input channels or 24 input channels in realtime. integration time

meter type channels iec ppm integration time level nordic bbc ebu bridge iia iib din reference

MITCalc - Roller Chains Calculation by MITCalc

Geometrical design and strength check of common chain transmissions using roller chains. The application works with many 2D and 3D CAD systems and includes corresponding databases of roller chains. The calculations use data, procedures and algorithms from ANSI/ASME, ACA (American Chain Association) ISO, DIN, BS and JIS. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units.

chain roller chain design strength check chain transmission ansi/asme b29.1m ansi/asme b29.3 din 8187 din 8181 din 8181 din 8164 din 8150 iso r606 iso 1275 bs 228 jis b1801 jis b1803.

MITCalc - Spur Gear Calculation by MITCalc

Geometric design and strength check of spur gear with straight and helical toothing. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks).

gearing spur gearing gear tooth toothing design strength check helical iso 6336 iso 1328 din 3990 ansi b6.1-1968 agma 2001-c95 agma 908-b89/95

MITCalc - Rolling Bearings Calculation by MITCalc

Selection, calculation and check of rolling bearings of the company SKF. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on SKF, ISO, ANSI, SAE standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks).

bearings bearing roller bearing bearings pair basic dynamic load equivalent dynamic load basic life basic static load equivalent static load static safety factor permissible radial load permissible axial load reference speed.

MITCalc - Multi pulley calculation by MITCalc

The calculation is developed for geometrical designs of belt and chain transmissions with more sprocket wheels (max. 15). It solve the necessary length of the belt (chain) using known positions and diameters of sprocket wheels. Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and support many 2D CAD systems. (AutoCAD, AutoCAD LT, IntelliCAD, TurboCAD...).

belt chain belt transmission chain transmission sprocket wheel ansi/rma ip-24 1983; din 7721; din iso 5296; iso 5295; iso 5294 ansi/asme b29.1m ansi/asme b29.3 din 8187 din 8181 din 8181 din 8164 din 8150 iso r606 iso 1275 bs 228

MITCalc - Force shaft connection by MITCalc

Geometric designs and strength checks of force couplings of shafts with hubs (Interference fit, clamping connection). Application is developed in MS Excel, is multi-language, supports Imperial and Metric units and is based on ISO, SAE, DIN, BS and JIS standards.

shaft hub connection force couplings interference fit clamping connection ansi b4.1 iso 286 din 7190

MITCalc3D for Autodesk Inventor by MITCalc

MITCalc is the multi-language mechanical and technical calculation package. It includes solutions for gear, belt and chain drives, springs, beam, shaft, bolt connection, shaft connection and many others. The calculations are compatible with many types of 2D (AutoCAD, IntelliCAD..) and 3D (Autodesk Inventor) CAD systems and support both Imperial and Metric units and are processed according to ANSI, ISO, DIN, BS, Japanese and other standards.

calculation calculations mechanical calculations technical calculations engineer cad cam autocad gear belt chain bearing beam shaft spring bolt tolerance analysis design autodesk inventor

MITCalc - Springs - 15 types by MITCalc

The calculation is intended for the purposes of geometric and strength designs of metal springs of various types and designs (15 types), subjected to static or cyclic loads. Application is developed in MS Excel, is multi-language and supports Imperial and Metric units. Is based on ANSI, ISO and DIN standards.

spring springs cylindrical spring compression spring helical spring conical springs spiral springs torsion bar springs leaf springs

MITCalc -Rolling Bearings Calculation II by MITCalc

Selection, calculation and check of rolling bearings (inch version). Application is developed in MS Excel, is multi- language and supports Imperial and Metric units. Is based on ISO, ANSI, SAE standards and support many 2D and 3D CAD systems (AutoCAD, AutoCAD LT, IntelliCAD, Ashlar Graphite, TurboCAD, Autodesk Inventor, SolidWorks).

bearings bearing roller bearing bearings pair basic dynamic load equivalent dynamic load basic life basic static load equivalent static load static safety factor permissible radial load

Page 1 out of 4    1 2 3 4