Free Udp Software

NetCom by Routix software

Easy-to-use packets-level filtering. NetCom is an extensible firewall, traffic controller, QoS, Bandwidth, Bridging, Redirection, NAT and traffic statistics software for the Microsoft Windows. Fully scriptable.

netcom ip tcp udp arp rarp traffic trafic network monitoring nat ics route routing mac address network remote access filter bandwidth qos bridging redirection

RemoteNetstat by Nsasoft LLC.

Remote Network Statistics displays remote network computer IP, ICMP, TCP, UDP and Server statistics, shows the details about IP datagrams including forwarding enabled-disabled state , default time to live, the number of received datagrams, datagrams with address, header, protocol errors, forwarded datagrams, incoming datagrams that have been discarded, delivered datagrams , sent datagrams, routing datagrams that have been discarded, etc.

task remote network statistics service control local remote network computer system programs run interactive parameters execute admin

Kiwi Logger by Kiwi Enterprises

Kiwi Logger (KLOG) is a free suite of syslog message sending tools for Windows. The tools allow you to add syslog message sending capabilities, via UDP or TCP, to your applications. The syslog messages can be received by Kiwi Syslog Daemon or compatible Syslog Daemons. You can access KLOG via console command line, Windows command line, DLL API or ActiveX component.

klog syslog daemon unix type syslog messages tcp syslog messages networking network utilities network tools

Active Ports by SmartLine Inc.

Active Ports - easy to use tool that enables you to monitor all open TCP/IP and UDP ports on the local computer. Active Ports maps ports to the owning application so you can watch which process has opened which port. It also displays a local and remote IP address for each connection and allows you to terminate the owning processt. Active Ports can help you to detect trojans and other malicious programs.

tcp ports udp ports open ports security fport

Routix NetCom by Routix software

Easy-to-use packets-level filtering. NetCom is an extensible firewall, traffic controller, QoS, Bandwidth, Bridging, Redirection, NAT and traffic statistics software for the Microsoft Windows. Fully scriptable.

netcom ip tcp udp arp rarp traffic trafic network monitoring nat ics route routing mac address network remote access filter bandwidth qos bridging redirection routix

easy Look at Packets by Look@Net.com

"easy Look at Packets" is a simple packets sniffer. Packets are filtered by incoming and outgoing, by IP addresses, ports and protocols - TCP, UDP, ICMP, IGMP. Programm does not demand installation and is very simple in management that is important for beginning managers of system. Besides there is no need in third-party libraries, such as WinCap, etc.

packets sniffer

Paessler Netflow Tester by Paessler GmbH

Paessler Netflow Tester dumps the data of all Netflow packets that a computer receives from a Cisco router. This can be useful when debugging bandwidth monitoring configurations based on Cisco's Netflow protocol. First the Netflow protocol must be enabled and configured on the router. Then the router must be given the IP address of the computer running Netflow tester so that the UDP data packets with Netflow data are sent to that computer.

snmp cisco netflow packet sniffer packet sniffing netflow cisco router firewall mrtg bandwidth usage ip volume prtg traffic graph network monitor monitoring free freeware

PortPeeker by Binary Visions Inc

PortPeeker is a standalone port listener, which uses whatever TCP/UDP port you specify and logs all incoming requests in detail. It provides a simple searchable text log overview of all connections that have taken place, as well as their details. In addition, a handy drop-down box on top lists all the IP addresses that have connected, and selecting on will let you jump to the associate log entries. Useful for application testing and monitoring.

portpeeker port sniffer traffic monitor honeypot security tcp udp quick easy port sniffer windows powerful features

P2P VoIp by Ivan Sorokin

The program is used for conversation in a local network. The voice packages are transmitted in a format GSM6.10. Voice packages and service information use one and the same UDP port: 4444. The program works without Server. Mixer allows to control sensitivity of a microphone and loudness of speaker. Simultaneous work with 5 clients. The program is distributed with the source code.

p2p network gsm610 rtcp codec freeware software application info information developer internet programmer

Active Wall Traffic Monitor by Active Network CO., LTD

Active Wall Traffic Monitor is a free real time network traffic monitor software for LAN. It can monitor more than 1,000 computers at the same time. It displays IP address, MAC address, computer name, send/receive speed, send/receive packets, send/receive bytes of each computer and provides traffic statistics, net flow. It can export daily traffic statistics of each computer automatically. Active Wall Traffic Monitor includes Show Flux plugin.

network traffic ip monitor lan tcp udp icmp igmp bandwidth packet intranet adapter mac analyzer statistics