|
|
MITCalc - Bolted connection
by MITCalc
Geometrical design and strength check of a prestressed bolt connection, loaded by static or cyclic loading resp., acting both in the axis of the bolt and in the plane of the connected parts. Calculation support many 2D CAD systems
bolt bolt connection bolt calculation prestressed bolt vdi 2230 ansi b1.1 ansi 273 ansi b18.2.1 ansi b18.2.2 ansi b18.3 ansi b18.6.2 ansi b18.6.3 ansi b18.22.1 iso 273 iso 1207 iso 4016 iso 4032 iso 4035 iso 4762
|
|
|
MITCalc - Roller Chains Calculation
by MITCalc
Geometrical design and strength check of common chain transmissions using roller chains. The application works with many 2D and 3D CAD systems and includes corresponding databases of roller chains from ANSI/ASME, ACA, ISO, DIN, BS and JIS.
chain roller chain design chain transmission ansi/asme b29.1m ansi/asme b29.3 din 8187 din 8181 din 8181 din 8164 din 8150 iso r606 iso 1275 bs 228 jis b1801 jis b1803.
|
|
|
MITCalc - Bevel Gear Calculation
by MITCalc
Geometric design and strength check of bevel gear with straight and helical toothing. Application supports Imperial and Metric units, is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems
gearing bevel gear gear tooth toothing design helical din 3971 din 3991 iso 6336 iso 1328 din 3990 ansi b6.1-1968 agma 2001-c95 agma 908-b89/95 agma 2003-a86/88 agma 2005-b88
|
|
|
MITCalc - Spur Gear Calculation
by MITCalc
Geometric design and strength check of spur gear with straight and helical toothing. Application supports Imperial and Metric units, is based on ANSI/AGMA and ISO/DIN standards and support many 2D and 3D CAD systems
gearing spur gearing gear tooth toothing design helical iso 6336 iso 1328 din 3990 ansi b6.1-1968 agma 2001-c95 agma 908-b89/95
|
|
|
MITCalc - Shafts Calculation
by MITCalc
The calculation is designed for geometrical design and complex strength check of shafts. Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems
shaft shafts design stress concentration critical speed safety coefficients deflection bending angle din 743
|
|
|
MITCalc - V-Belts Calculation
by MITCalc
Geometric design and strength check of belt transmissions using V-belts. Application contain a database of belts, supports Imperial and Metric units, is based on ANSI, RMA, ISO, DIN and BS standards and support many 2D and 3D CAD systems.
belt v-belt v-belt transmission design narrow v-belts ansi/rma ip-22 traditional v-belts ansi/rma ip-20 light duty v-belts ansi/rma ip-23 din 7753 din 2211 din 2215 iso 4184
|
|
|
MITCalc - Buckling Calculation
by MITCalc
Calculation of the optimum cross-section of slender struts strained for buckling and strength check calculation according to Johnson, Tetmajer, Euler and Secant method. Simple definition of the strut type - 40 types of predefined cross sections.
buckling slender strut beam column moment stress safety din 1025 1026 1028 1029 1024 aisc w s c l lu
|
|
|
MITCalc - Tension Springs
by MITCalc
Geometric and strength designs of helical tension cylindrical springs loaded with static loading. Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems.
spring springs cylindrical spring tension spring helical spring en 13906-2 din 2089-2 din 2097 static strength check dynamic strength check.
|
|
|
MITCalc - Compression Springs
by MITCalc
Geometric and strength designs of helical compression cylindrical springs loaded with static or fatigue loading. Application supports Imperial and Metric units, is based on ANSI, ISO, DIN standards and support many 2D and 3D CAD systems.
spring springs cylindrical spring compression spring helical spring en 13906-1 din 2089-1 din 2095 static strength check dynamic strength check.
|
|
|
MITCalc - Force shaft connection
by MITCalc
Geometric designs and strength checks of force couplings of shafts with hubs (Interference fit, clamping connection). Application supports Imperial and Metric units and is based on ANSI, ISO, DIN BS, JIS standards.
shaft hub connection force couplings interference fit clamping connection ansi b4.1 iso 286 din 7190
|
|
|
Page 1 out of 2
1
2
|
